+86-137-1314-4446        wei@suyidz.com 
Custom 1.25mm JST-Type Automotive Cable Assembly
You are here: Home » Products » Custom Wire Harness » Silicone Wire Harness » Custom 1.25mm JST-Type Automotive Cable Assembly
Contact Us

Custom 1.25mm JST-Type Automotive Cable Assembly

SUYI定制的1.25毫米JST型汽车电缆组件,支持紧凑型车辆电子设备中的可靠信号、视频和电源连接。它采用铜导体、阻燃绝缘和耐腐蚀电镀,为汽车模块提供可定制的电缆长度、线径、针数、屏蔽和线缆出口方向。
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button
  • JST

  • SUYI

Product Overview

The Custom 1.25mm JST-Type Automotive Cable Assembly is designed for reliable electrical connections in modern automotive electronic systems. Featuring a compact 1.25mm connector pitch, this custom wire harness supports space-efficient connections in vehicle cameras, sensors, control modules, displays, and infotainment systems.

Built with copper conductors, flame-retardant insulation, and corrosion-resistant contact plating, the assembly is designed to meet different automotive wiring requirements. SUYI offers customized cable lengths, wire gauges, connector pin counts, shielding methods, and wire exit directions to accommodate specific electrical designs and installation conditions.

Key Features

Reliable Automotive Connections

Automotive electronic components are exposed to vibration, temperature changes, and continuous operation. This 1.25mm JST-type cable assembly is designed with these conditions in mind, using suitable connector and wire configurations to support dependable electrical connections.

The original product specification provides an operating temperature range of -40°C to +85°C, with higher-temperature configurations available upon request. The applicable temperature rating depends on the selected connector, wire insulation, terminals, and completed assembly.

Durable Materials

The assembly uses high-quality copper conductors, flame-retardant wire insulation, and corrosion-resistant contact plating to support electrical performance and service life. These materials help protect internal connections during regular operation.

For applications exposed to automotive oils, chemicals, or humid conditions, suitable insulation and connector materials can be selected according to the installation environment.

Secure Locking Structure

The locking structure of the selected JST-type connector helps maintain proper connector engagement and reduce accidental disconnection caused by vehicle vibration.

Correct connector mating and terminal installation are important for maintaining stable electrical continuity throughout operation.

Compact 1.25mm Pitch

The fine 1.25mm connector pitch supports compact wiring arrangements in electronic devices with limited internal space. It is particularly suitable for automotive cameras, sensors, displays, ECU control units, and infotainment modules where connector size and cable routing are important.

Flexible Cable Design

SUYI provides customized wire harness configurations to match different automotive electronic designs. Cable length, wire color, wire gauge, connector pin count, shielding method, and wire exit direction can be adjusted according to customer requirements.

Braided shielding is also available as a customization option for applications requiring additional electromagnetic interference protection.

Technical Specifications

Parameter Specification
Product Name Custom 1.25mm JST-Type Automotive Cable Assembly
Brand SUYI
Model JST
Connector Type JST-Type
Connector Pitch 1.25mm
Conductor Material Copper
Wire Insulation Flame-Retardant Insulation
Contact Plating Corrosion-Resistant Plating
Operating Temperature -40°C to +85°C, depending on configuration
Higher-Temperature Options Customizable Upon Request
Cable Length Customizable
Wire Color Customizable
Wire Gauge Customizable
Connector Pin Count Customizable
Shielding Method Customizable, Including Braided Shielding
Wire Exit Direction Customizable
Transmission Functions Signal, Video, and Power Connections
Applications Automotive Electronic Systems

The final electrical and environmental specifications depend on the selected connector series, conductor size, insulation materials, and assembly configuration.

Customization Options

Every automotive electronic system has different space, circuit, and installation requirements. SUYI offers custom 1.25mm JST-type cable assemblies to match customer drawings, samples, and technical specifications.

Cable and Wire Configuration

  • Cable Length: Adjust cable length to fit the distance between electronic components.

  • Wire Color: Specify wire colors for circuit identification and installation.

  • Wire Gauge: Select appropriate conductor sizes for the required electrical load and connector terminals.

  • Shielding Method: Choose suitable shielding options, including braided shielding for electromagnetic interference protection.

Connector Configuration

  • Pin Count: Customize the number of connector pins according to circuit requirements.

  • Wire Exit Direction: Specify cable routing direction to accommodate compact module layouts.

  • Connector Matching: Select compatible JST-type connector configurations according to the mating interface.

Customization helps buyers obtain a wire harness that fits the intended equipment without unnecessary cable length or unsuitable connector arrangements.

Stable Signal Transmission

Automotive electronics depend on consistent connections for signal, video, and power transmission. SUYI uses controlled wire processing, terminal crimping, and connector assembly procedures to support reliable electrical contact.

Consistent Electrical Contact

Proper conductor preparation and terminal crimping help reduce connection inconsistencies and maintain electrical continuity. Suitable terminal materials and contact plating also support contact stability during regular operation.

EMI Protection Options

Automotive environments contain multiple electrical and electronic systems that may generate electromagnetic interference. For suitable applications, braided shielding can be incorporated into the cable assembly to help reduce interference affecting signal connections.

Actual transmission performance depends on the circuit design, cable length, shielding arrangement, and connector specifications.

Support for Automotive Electronic Networks

The cable assembly can be used in compatible connections within Advanced Driver Assistance Systems (ADAS), camera modules, and other automotive electronics. Its compact design supports signal routing in limited spaces, while the final configuration is selected according to the required transmission characteristics.

Automotive Applications

The custom 1.25mm JST-type cable assembly is suitable for a range of automotive electronic applications where compact connections and flexible wiring arrangements are required.

In-Vehicle Camera Modules

Provides compact electrical connections for compatible internal camera circuits, supporting cable routing in limited installation spaces.

Radar and LiDAR Sensors

Can be configured for suitable internal signal and power connections in radar and LiDAR sensor modules, subject to their electrical and environmental requirements.

Infotainment and Display Systems

Supports connections within infotainment equipment, display modules, and related in-vehicle electronic assemblies. Custom cable lengths and connector arrangements help accommodate different module layouts.

ECU and BCM Connections

Can be used for compatible signal and low-power interconnections in Electronic Control Units (ECUs) and Body Control Modules (BCMs).

Climate Control and Instrument Panels

Provides wiring options for air conditioning control systems, dashboard instruments, and related electronic control circuits.

Automotive Sensors and Actuators

Supports customized electrical connections in suitable vehicle sensors and actuator control circuits. Connector and wire specifications are selected according to the required operating conditions.

Manufacturing and Quality Control

SUYI focuses on consistent wire processing, connector assembly, and electrical inspection to support the quality requirements of custom automotive cable assemblies.

Precision Wire Processing

Manufacturing involves wire cutting, stripping, terminal crimping, and connector installation. Controlled processing procedures and automated production equipment help maintain consistent wire lengths and terminal connections.

Electrical Testing

Each completed wire harness undergoes 100% electrical testing as part of the quality control process. Electrical inspection helps identify continuity problems, incorrect wiring, and short circuits before delivery.

Quality Management

SUYI places emphasis on manufacturing consistency and product inspection for automotive electronic applications. Customer-specific quality requirements, including relevant IATF 16949 requirements, can be discussed during project evaluation.

Additional inspection or validation requirements may be established according to customer specifications and the intended operating environment.

How to Choose the Right Cable Assembly

Selecting a suitable 1.25mm JST-type cable assembly involves checking connector compatibility, electrical requirements, and installation conditions.

Confirm Connector Compatibility

Verify the connector series, mating interface, pin count, and locking structure. Identical connector pitches do not necessarily mean that different connector housings are interchangeable.

Check Electrical Requirements

Review the required voltage, current, conductor size, and transmission function. For signal-sensitive applications, cable length and shielding requirements should also be considered.

Evaluate Operating Conditions

Identify the expected temperature range, vibration exposure, humidity, and possible contact with automotive fluids. Select suitable wire insulation and connector materials for the installation environment.

Provide Assembly Specifications

Submit cable drawings, connector specifications, wiring diagrams, or existing samples to help define the required configuration. Clear specifications help reduce compatibility issues during assembly and installation.

Frequently Asked Questions

1. Are all 1.25mm JST-type connectors compatible?

No. Connectors with the same 1.25mm pitch may have different housing dimensions, terminal structures, and locking designs. The mating connector series and specifications should be checked before selecting a cable assembly.

2. Can I customize the cable assembly for an existing automotive electronic module?

Yes. SUYI can evaluate custom requirements based on existing samples, connector details, wiring diagrams, or technical drawings. The final assembly configuration should match the electrical and mechanical requirements of the module.

3. What information is required for a custom cable assembly quotation?

You can provide connector specifications, pin count, wire gauge, cable length, wiring diagram, order quantity, and application requirements. Additional information about temperature, shielding, or material requirements can help define the appropriate configuration.

4. Can different connector types be used at both ends of the cable?

Custom connector combinations can be evaluated according to the required wiring design. Connector compatibility, terminal arrangements, and circuit requirements must be checked before confirming the assembly.

5. Can this cable assembly be used in an engine compartment?

The application depends on the operating temperature, vibration, chemical exposure, and selected materials. Engine compartment installations may require higher-temperature insulation and additional environmental protection. The final configuration should be evaluated against the intended conditions.

6. Is the 1.25mm JST-type cable assembly suitable for high-current applications?

The allowable current depends on the selected connector series, terminal design, wire gauge, and operating temperature. Compact 1.25mm connectors are generally more appropriate for compatible signal and low-power circuits. Electrical ratings should be verified before use.

Request a Custom Cable Assembly

Need a 1.25mm JST-type cable assembly for your automotive electronics project?

SUYI provides custom wire harness solutions tailored to different connector configurations, wiring layouts, and application requirements. We work with customer specifications to support suitable material selection, manufacturing, and electrical inspection.

Contact our team with your connector details, wiring diagram, or existing sample to discuss your project requirements and request a quotation.


Previous: 
Next: 
Contact Us
Landline number: +86-769-81664366
Telephone: +86-137-1314-4446
E-mail:  wei@suyidz.com
 
Add: 2, No. 9, Chongsheng Road, Chang'an Town,Dongguan City,Guangdong Province.523850
WhatsApp: +86 18223673522

Quick Links

Product Category

Support

Copyright © 2024 Dongguan Suyi Electronics Co., Ltd. All Rights Reserved.