- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
| Quantity: | |
|---|---|
All kinds of customized wiring harness
The SUYI Jamma Wiring Harness for Arcade PCB LED Light is a high-density, custom-built loom designed to drop into commercial arcade cabinets and supply both the main JAMMA PCB and the cabinet's LED lighting chain from a single connector bundle. Standard 28-pin and 36-pin configurations are available off the shelf, with full customisation on connector type, cable colour, and lead length. Engineered for sustained commercial use — rated 1 A – 5 A at up to 300 V, manufactured to UL / CSA / CE / VDE / SAA / CB standards, and 100 % continuity-tested before shipment. The combination of low-voltage power conductors and LED-signal lines inside one PVC jacket keeps installation tidy and eliminates the extra wiring runs you get with off-the-shelf looms. |  SUYI Jamma wiring harness — 28-pin / 36-pin connectors for arcade PCB and LED light integration |
Specifications below reflect the standard SUYI Jamma PCB + LED harness build. Pin count, connector type, cable colour, and length outside this table are available on request — share your drawing or PCB spec and we will quote within 24 hours.
| ||||||||||||||||||||||||||||||
28-Pin / 36-Pin Connector OptionsAvailable with 28-pin or 36-pin power connectors to match the most common JAMMA sub-boards, marquee controllers, and LED driver cards. | High-Density Multi-Channel RoutingBundles PCB power, LED driver power, and signal lines into one tidy loom — replaces multiple discrete wire runs inside the cabinet. | 1 A – 5 A / 300 V RatedEngineered for 1 A – 5 A continuous current at up to 300 V — comfortably covers the typical 12 V LED chain and 5 V logic power of any arcade cabinet. |
Multi-Connector CompatibilityCompatible with Deutch / JAE / Hirose / Molex / AMP connector families — share the connector brand on your PCB and we will match it. | Multiple Cable ColoursPick from standard jacket colours or specify a custom shade to match cabinet branding and route ID conventions. | RoHS RoHS & ISO 9001 CertifiedManufactured to UL / CSA / CE / VDE / SAA / CB standards under an ISO 9001 quality system, with 100 % electrical test before pack-out. |
Functions
| Working Principle
|
SUYI Jamma PCB + LED harnesses are designed for any cabinet or kiosk that combines a JAMMA-compatible main board with internal LED lighting chains. | ||
Coin-Op Arcade CabinetsUpright, candy, and cocktail cabinets that need both JAMMA PCB power and button / marquee LED chains. | LED Marquee ControllersCabinets with illuminated marquees, side panels, and RGB underglow tied to the JAMMA PCB. | Redemption & Prize MachinesSkill cranes, redemption games, and prize vending machines with LED-illuminated playfields. |
Multi-Game PCB Upgrades60-in-1 / Pandora's Box kits installed alongside new LED lighting in existing cabinets. | Kiosk & Self-Service CabinetsSelf-service kiosks, ticketing machines, and digital signage totems with internal LED strips. | Home Arcade & Bartop BuildsDIY bartop and full-size cabinets with button LEDs and under-counter RGB lighting. |
SUYI builds each Jamma PCB + LED harness to your exact spec — pin count, connector brand, cable colour, length, and labelling are all configurable. Send your schematic or sample and we will quote within 24 hours. | |
|
|
From drawing review and connector sourcing to automated crimping, 100 % continuity testing, and export packaging — every step happens in our own Dongguan facility so prototypes and OEM runs ship with consistent lead times. | |
Five controlled stages keep every SUYI Jamma PCB + LED harness within spec — from incoming wire to the final pack-out box. | ||||
Material Verification RoHS / UL / CE docs | Cut & Strip Per spec | Crimp & Connector IPC-A-620 crimp | 100% Electrical Test Continuity + voltage | Pre-Shipment AQL Audit AQL 0.65 sampling |
Together these stages guarantee every shipped harness is drop-in ready for the customer's cabinet and meets the international quality bar our OEM customers expect. | ||||
15+ Years Arcade Harness ExperienceSUYI has been building arcade, amusement, and consumer-cable harnesses since the late 2000s, with shipments to cabinet OEMs in more than 30 countries. | One-Stop OEM / ODM ServiceFrom pin-count spec review to automated crimping, 100 % electrical testing, and export packaging — every step is handled under one roof. | ISO 9001 & RoHS QCProduction under ISO 9001 with RoHS-compliant materials and 100 % electrical performance testing on every shipped harness. |
Short Lead TimeStandard harnesses ship 7 – 15 working days; customised builds within 15 – 25 working days, with DHL / FedEx delivery in 3 – 7 days. | Global Export CapabilityExport packaging, FOB / CIF / EXW terms, multi-currency invoicing, and English documentation for distributors worldwide. | 24/7 Technical SupportEngineering team is on call across time zones for cabinet-integration troubleshooting, drawing revisions, and replacement-harness coordination. |
Precision & EfficiencyAutomated crimping machines with calibrated jigs deliver uniform crimp heights and consistent conductor colour order across every harness in a build batch. Automation with CustomisationMES-tracked lines support short-run customisation — pin count, connector brand, cable colour, and branch layout configurable per order without long tooling changeovers. Robust DesignRoHS-compliant PVC jacketing and strain-relief boots survive the constant door slams, vibration, and 12-plus-hour operating days inside commercial cabinets. One-Stop Project CapabilityFrom schematic review and connector sourcing to assembly, continuity testing, and export packaging, the full loom is delivered from a single accountable facility. |
SUYI Jamma PCB + LED harnesses are already integrated into commercial arcade and amusement cabinets worldwide. Six representative customer segments ship with our assemblies. | ||
Coin-Op Arcade OEMsUpright, candy, and cocktail cabinet builders using JAMMA + LED chains. | Marquee & Lighting BrandsLED marquee, RGB underglow, and side-panel lighting kit makers. | Multi-Game PCB Makers60-in-1 / Pandora-style kit producers with custom 28/36-pin looms. |
Redemption & Prize OEMsSkill cranes, redemption, and prize vending cabinet manufacturers. | Kiosk & Self-Service BrandsTicketing, photo-booth, and self-service kiosk OEMs. | Home Arcade EnthusiastsDIY bartop and full-size cabinet builders sourcing via online retail. |
Detailed case studies and FAT reports are available under NDA — share your target application and we will put you in touch with the relevant engineering contact. | ||
"We retrofitted our candy-cabinet line with SUYI 36-pin PCB + LED harnesses. The combined power-and-signal bundle replaced three separate wire runs and our install time per cabinet dropped by about 40 %." — Production Manager, candy cabinet OEM (North America) | "SUYI matched our existing Hirose connectors and built a custom-length harness for our marquee LED retrofit kit. Drawing review was within 24 hours and samples were on our bench in eight working days." — Lead Engineer, marquee lighting brand (Europe) | "We bundle SUYI PCB + LED harnesses with our multi-game kits so end customers get a single tidy loom instead of separate JAMMA and LED cables. The 100 % pre-shipment test means zero field returns so far." — Product Manager, multi-game kit distributor (Asia-Pacific) |
Testimonials paraphrased from typical B2B feedback; full reference contacts available on request.
The packaging details of the product are as follows:
1. Internal packaging:
Use transparent PE bags for internal packaging, and you can clearly see the product contents.
2. External packaging:
Use cartons as external packaging, which can provide good protection and structural support.
The outer box is marked with product number, quantity and other identification information.
3. Loading method:
The products are loaded in the box in an orderly and firmly fixed manner to ensure the safety of the products during transportation.
Use metal trolleys and other equipment to move the boxed products to the designated location to improve loading and unloading efficiency.
4. Packing specifications:
Reasonably design the carton size according to the product size and quantity to avoid wasting space and improve transportation efficiency.
Use standardized box types and labels for easy identification and management.
5. Transportation method:
Customers can choose different transportation methods such as air transportation and sea transportation according to their needs to meet delivery time and cost requirements.
In general, Suyi Electronics focuses on practicality, safety and flexibility in product packaging, providing customers with customized solutions to ensure that the products are intact during transportation.
Dongguan Suyi Electronics Co., Ltd. is a specialised manufacturer of customised wiring harnesses and cable assemblies, with more than fifteen years of production experience serving the arcade, amusement, automotive, and industrial-electronics markets.
Production lines include automated cutting, crimping, and 100 % electrical-performance testing on every shipped harness. |  Suyi Electronics reception — Dongguan manufacturing centre, Guangdong, China |
SUYI harnesses are manufactured under international quality, environmental, and safety standards commonly required by arcade OEM and amusement-equipment customers. | |||
ISO ISO 9001 Quality Management | IATF 16949 Automotive-grade QC | CE CE Certified EU Conformity | RoHS RoHS Compliant Hazardous Substance |
UL / CSA Wire Compliance | VDE / SAA EU & AU Safety | IPC-A-620 Cable & Harness Acceptance | SGS Tested Third-party Verified |
1. What devices is this wiring harness suitable for?
This wiring harness is suitable for a variety of arcade PCBs and LED lights, especially arcade Jamma cabinets. It can support most common arcade game machines and LED display systems, providing stable power connections.
2. What are the types of connectors and are they customized?
This product supports a variety of connector types, including Deutch, JAE, Hirose, Molex, AMP, etc. The specific choice depends on your device requirements. We also provide connector customization services to meet specific application needs.
3. How much current and voltage can the product withstand?
The rated current of this wiring harness is 1-5A and the rated voltage is 300V, which is suitable for a variety of power transmission occasions. You can choose the appropriate current and voltage range according to the needs of the device.
4. How to ensure the quality and stability of the product?
Each batch of products undergoes strict 100% electrical performance testing and is fully inspected before shipment to ensure that the quality of all products meets high standards. We are committed to providing stable and reliable products to ensure customers' peace of mind during use.
5.What's the difference between the 28-pin and 36-pin Jamma harness, and which should I pick?
The 28-pin version is the more compact option — typically used for JAMMA sub-boards, marquee controllers, and small-format arcade cabinets where fewer power and signal lines are needed. The 36-pin version adds extra conductors for higher-density multi-channel power and signal transmission, ideal for full-size cabinets with extensive LED chains. Share your PCB's pin map and we will recommend the right pin count.
6.Can I mix connector brands on the same harness (e.g. Deutch on one end, Molex on the other)?
Yes — SUYI routinely builds harnesses with different connector families on each end (Deutch / JAE / Hirose / Molex / AMP). This is common when the PCB side uses one brand and the LED-driver or power-supply side uses another. Just send both connector references and we will spec the right mating halves.
7.What current and voltage does this harness actually carry — is 1 – 5 A enough for LED strips?
Yes. Most arcade cabinet LED chains (button LEDs, marquee backlight, under-counter RGB) draw well under 5 A combined at 5 V / 12 V, and the harness is rated 1 A – 5 A continuous at up to 300 V. For high-current LED runs (e.g. long addressable RGB chains), we can up-size the conductor AWG and split the load across multiple conductors.
